As electronic devices continue to shrink while simultaneously becoming more powerful and feature-rich, the packaging technology that houses semiconductor chips and integrates multiple functions into a single unit has become one of the most consequential disciplines in modern electronics manufacturing.
IC packaging the process of enclosing and interconnecting bare semiconductor dies within a protective, functional housing is no longer just about physical protection. Today, it is a primary driver of miniaturization, power efficiency, signal integrity, and thermal management. And within IC packaging, System-in-Package (SiP) technology stands as one of the most powerful tools available to electronics designers.
PCB-technologies, through its dedicated iNPACK division, offers a fully integrated IC packaging and SiP capability that spans design, substrate manufacturing, assembly, and testing all on one campus.
What Is IC Packaging?
IC packaging is the process of enclosing an integrated circuit die in a protective enclosure (the ‘package’) that provides electrical connections to the circuit board, mechanical protection for the die, and a thermal path for heat dissipation.
Types of IC packages span a wide spectrum, from simple DIP (Dual In-Line Package) and QFN (Quad Flat No-Lead) formats to advanced organic substrate packages, flip chip BGAs, and multi-chip modules. The choice of package type has profound implications for board size, thermal performance, electrical performance, and manufacturing yield.
PCB-technologies’ iNPACK division covers a broad range of IC packaging formats, including:
- System-in-Package (SiP): Multi-component, multifunction miniaturized assemblies
- QFN (Quad Flat No-Lead) packages: Both standard and organic types, manufactured using panel-level processes
- Multi-Chip Modules (MCMs): Integrating multiple dies and components in a single package footprint
- Chip-on-Board (COB): Bare die directly attached and wire-bonded to the PCB substrate
- Flip Chip: Die interconnected face-down via solder bumps, eliminating wire bonds
- Organic substrates: Designed and manufactured in-house
Learn more about the iNPACK platform at pcb-technologies iNPACK / IC Packaging.
What Is System-in-Package (SiP)?
System-in-Package (SiP) is an advanced form of IC packaging in which multiple components dies, passive components, MEMS devices, RF modules, and more are integrated into a single package that delivers a complete, functional subsystem.
SiP is distinct from System-on-Chip (SoC), where all functions are integrated onto a single die. In SiP, different dies (potentially from different process nodes or manufacturers) are co-packaged, enabling more flexibility and faster time-to-market. This makes SiP particularly valuable for defense, aerospace, IoT, and medical applications where off-the-shelf SoC solutions may not exist.
At pcb-technologies, SiP solutions are multi-component, multifunction products that leverage the company’s core strengths in PCB fabrication, substrate design, and miniaturization to offer customers higher levels of integrated functionality with reduced lead times. Key SiP capabilities include:
- Complete in-house design to manufacture: The R&D center and manufacturing facilities share the same campus, enabling rapid iteration
- Custom organic substrate design and manufacturing
- Surface mount technology (SMT) component integration
- Chip-on-Board (COB) and microfabrication
- Comprehensive SiP-level testing and reliability analysis
Read about advanced miniaturization and SiP solutions at pcb-technologies’ miniaturization platform.
The Role of Organic Substrates in IC Packaging
The organic substrate is the core interconnect layer of an advanced IC package the interface between the bare die and the circuit board. Substrate design requires extremely fine line widths, precise via structures, and careful management of thermal expansion coefficients to ensure reliability over the product’s lifetime.
PCB-technologies manufactures organic substrates in-house, with capabilities including:
- Fine line/space design rules compatible with advanced flip chip and BGA packages
- Low CTE (Coefficient of Thermal Expansion) materials compatible with organic substrate designs
- Film-Assisted Molding for package encapsulation
- Panel-level manufacturing processes that enable cost-effective production of QFN and SiP packages
iNPACK: PCB-technologies’ Dedicated IC Packaging Division
iNPACK is pcb-technologies’ specialist division for IC packaging, organic substrates, and advanced microelectronics. Headed by VP R&D and Innovation Yaniv Maydar a specialist in Systems Engineering, RF and Embedded Systems, microwave R&D, System Packaging Technologies, and MMIC design the division serves customers in the semiconductor, defense, aerospace, medical, and communications sectors.
iNPACK offers complete package PCB assembly solutions for both low and high volume requirements. The division’s all-in-one model provides:
- Substrate design and manufacturing
- IC packaging design and engineering support
- SMT, COB, and flip chip assembly
- SiP design and manufacturing
- Reliability analysis and testing
- Design for Manufacturing (DfM) services specific to IC packaging
Unlike outsourced semiconductor assembly and test (OSAT) companies that focus purely on assembly, iNPACK integrates substrate design with packaging and assembly giving customers a single, technically unified partner from concept to production.
Return to the pcb-technologies homepage to explore all capabilities at pcb-technologies.com.
Frequently Asked Questions
Q: What is IC packaging?
A: IC packaging is the process of enclosing a semiconductor die in a protective housing that provides electrical connections to the circuit board, mechanical protection, and a thermal dissipation path. Package types range from QFN and BGA to advanced SiP and multi-chip modules.
Q: What is System-in-Package (SiP)?
A: SiP integrates multiple dies, passive components, and other elements into a single package that delivers a complete functional subsystem. It differs from System-on-Chip in that SiP can combine chips from different process nodes or manufacturers in one package.
Q: What does the iNPACK division at pcb-technologies offer?
A: iNPACK is pcb-technologies’ specialist IC packaging and miniaturization platform, offering substrate design and manufacturing, SiP design and assembly, COB, SMT, flip chip, organic substrate manufacturing, and comprehensive testing all in-house.
Q: Why choose in-house substrate manufacturing over outsourcing?
A: In-house substrate manufacturing at the same facility as PCB design and assembly means faster design cycles, unified design rules, tighter quality control, and reduced lead times. It also makes DfM reviews more effective since the substrate and board teams collaborate directly.
Q: What industries benefit most from SiP technology?
A: Defense and aerospace (where miniaturization and custom integration are critical), IoT and wearables (where size and power are tightly constrained), medical devices (where reliability and miniaturization are both essential), and communications (for RF integration).
